Used Sencorp 2500 r-hydraulic form and trim inline thermoformer 1993
USED SENCORP Series 2500 All Hydraulic Inline Thermoformer.. Trim thermoformer designed for pressure Froming, Vacuum Forming, Plug Assist and Matched Mold Operations. New 1993 includes stacker and knock out-hole puncher
PRE-HEAT OVEN: Top & Bottom quarts pre-heaters retract automatically when the mahcine stops. Length of oven 100". Tmeperatures are monitored and controlled after selection by the operator, by means of the SENTROLLER II using proportioning derivative loop with thermocouple sensors. 26 Zones -13 Top, 13 Bottom.
FORMING PRESS: Four Post, 50 ton, four point toggle operated upper and lower moving platens with internal mounted hydraulic drive cylinder. The forming press for pressure forming is rated at 100 Psi based on a maximum mold size 25" x 30". Top and bottom platen return srokes are controlled by adjustable stops and include decelertating valves. Standard stroke: 5" top, 5" bottom. INCLUDES LINCOLN LUBRICATING SYSTEM.
TRIM PRESS: Four post, 75 ton, four point toggle operated upper and lower moving platens. Top platen to have internalmounted hydraulic drive cylinder. Trim pressure is provided by four hydraulicallyactivated bump cylinders.
CHAIN FEED & INDEX: The material advance will be by pin chains driven by a servo motor. Water cooled rails running the entire length of the machine insures constant chain temperature. Automatic chain lubrication system is standard.
LUBRICATION SYSTEM: Allows greasing of all major components from four central locations,
Sentroller II Process Controller
Forming Area: 25 x 30 (maybe 30" long)
Forming Press:
Std. Max Stroke 5" top, 5" bottom
Trim Press:
Std. Max Stroke 5" top, 4" bottom
Sheet Width: Pin chain (entire length of machine)
Servo Index
Shut Height: 12" Form Press;
12-3/6" Trim Press
Voltage: 440 V - 3 Phase
