The Source for Thermoformers, CNC Routers, Heat Sealers & More

Used FMLR 3300 lip roller

Machine Number: 17113

Size:

 
OR

Quick Overview

Used FMLR 3300 lip roller

17113

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • 17113
  • 17113
  • 17113
  • 17113
  • 17113
  • 17113

Details

Used FMLR 3300 lip roller
Designed to  curl PET, PLA and HIPS.

FMLR-3300 SERIES

THE FMLR-3300 SERIES THREE-SCREW LIP ROLLER MACHINES ARE DESIGNED TO ROLL THE LIP OF ROUND PLASTIC CONTAINERS WITH MUCH MORE CONSISTENCY DUE TO THREE POSITIVE POINTS OF SCREW CONTACT WITH THE CONTAINER. THE THREE-SCREW LIP ROLLER ALLOWS EASE OF SET-UP, OPERATOR FRIENDLINESS, AND OPENS THE PROCESS WINDOW.

This quotation can be used as a guide.

GENERAL DESCRIPTION:


A nested continuous stack of round product with a return flange are conveyed to a crowd roller

System, which spins and drives the product through the oven and to the rotating curling screws.

The temperature controlled three-screws then curl the return flange to the sidewall of the product,

And exit the screw onto an exit pan.


SPECIFICATIONS:


1.  Infeed                                                                                                                                                                                

    1.1  Infeed conveyor with vertical screw adjustment.  Side rail guards guide the product                                                    

           to the crowd rollers.

    1.2  Infeed conveyor has variable speed control settings.                                                                                                    


2.  Crowd Rollers                                                                                                                                                                     

    2.1  The three rubber crowd rollers angle can be adjusted while machine is in operation.                                                  

    2.2  Single point adjustment on the crowd rollers (cam operated) allows the diameter                                                       

           to be changed while the machine is in operation.                                                                                                        


3.  Oven                                                                                                                                                                                    

   3.1  A clam shell oven frame 33” long                                                                                                                               

   3.2  Cal rod heating elements.                                                                                                                                           

   3.3  Two heating zones (infeed and exit)                                                                                                                             

   3.4  Oven is controlled by solid state digital controllers                                                                                                       

   3.5 Removable heat shields.                                                                                                                                                 


4.  Controls                                                                                                                                                                                

   4.1  High voltage enclosure is available from right hand side (unless otherwise specified)  (side                     

          is determined by material flow direction).  Enclosure mounts into main frame.                                                                               

   4.2  High voltage standard:                                                                                                                                                  

           480 primary volts, 3 phase, 60 Hertz                                                                                                                                

            120 secondary volt, 1 phase, 60 Hertz                                                                                                       

    4.3   Three machine emergency stops                 



5.  Drive                                                                                                                                                                                    

   5.1  A.C. variable speed drive motor                                                                                                                                       

   5.2  5 H.P. motor                                                                                                                                                                 

   5.3  Speed tachometer display

  1. External speed potentiometer



6.  Tooling:  Screws And Rollers                                                                                             

   6.1  Direct driven screws by a timing belt.                                                                                                                           

   6.2  Single point screw adjustment (cam operated) for product diameter changes.                                                             

   6.3  Screws are designed for two-stage temperature control. (Hot tip screws).                                                                    

   6.4  Cage rollers assist in feeding the product through the screw.                                                                                     

   6.5  Screw set-up gauge                                                                                                                                                       



7.  Temperature Control Unit  (Conair Thermolator)                                                                                                                                                 

   7.1  Self-contained water temperature control unit mounted into main frame.                                                                      

                                                                                                           

8.  Machine Dimensions                                                                                                                                                         

   8.1  Machine length is 146”, width 24”, and height is 66”.  Does not include exit pan.                                                    

   8.2  Frame mounted on four casters for easy movement



9.  Color                                                                                                                                                                                    

    9.1  White with black guard grid                                                                                                                                                         




 

 




Additional Information

Machine Number 17113
Inventory Code VAC6
Size 000