The Source for Thermoformers, CNC Routers, Heat Sealers & More

New FMT Patriot CNC Router, 4'x8' Table, 11HP HSD Spindle With 5 Station Auto Tool Changer, 2 Zone Vacuum Table, Becker Vacuum Pump, Fagor 8035 Controller, One Year Warranty

Machine Number: 9367

Size:

 
OR

Quick Overview

New FMT Patriot CNC Router, 4'x8' Table, 11HP HSD Spindle With 5 Station Auto Tool Changer, 2 Zone Vacuum Table, Becker Vacuum Pump, Fagor 8035 Controller, One Year Warranty

Video Feed

9367

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • 9367
  • 9367
  • 9367
  • 9367
  • 9367

Details

The FMT Patriot is the ideal combination of price and quality. These machines are built in Colorado Springs and feature Servo Motors, Ball Screw Drives, Welded & Stress Relieved Steel Frames, and a Fagor Industrial CNC Controller. The closest & most comparable AMERICAN BUILT machines cost over $30,000 more. Because of that price discrepancy the Patriot Router often sells for the same price as comparable or even inferior used machines. This is our Cabinetry and Plastics Fab configuration:  


New FMT Patriot 3 Axis 4'x8' Table CNC Router

Base Machine Configuration:
3-Axis, moving gantry design with a 4' x 8' work area

Welded steel tube, angle and plate frameworks, precision machined, drilled and tapped to accept a 4' x 8' table option from Freedom Machine Tool (FMT) or one produced by the customer

Z-Axis tool plate with a 7' servo driven, vertical stroke, ready to accept a spindle option from FMT, or it can be configured by the customer

FAGOR 8035 Industrial CNC control with color CRT, 256K eeprom memory, 128 MB flash-disk program storage, USB port for memory stick program transfer, M&G code programming, tool path graphics, and feed-rate and spindle speed override.

25mm precision, profiled rails with recirculating bearing blocks on all axes

Precision ball-screws with anti-backlash ball-nuts on all axes (25mm on X & Y, 20mm on Z). Click here for picture

FAGOR industrial quality digital AC servo motors and amplifiers on all axes.

220v, 3-phase, 60 hz power. 30 amps required

Base Price: $22,720
Table:
  • 4' x 8' Phenolic Two Zone Vacuum Table with Manual Controls : $1,650.00  
Vacuum Pump:
  • 8.6 HP Becker VTLF 2.250, 169 ACFM, 208, 220V, 460 Three Phase, 60 Hz : $6,875.00  
Accessories:
  • Dust Hood with 5' Port (requires a minimum 1,000 cfm dust collector, not included) : $325.00 
  • 6-Position Tool Rack for Automatic Tool Change System : $1,080.00  
  • Automatic Tool Height Sensor in 6th Tool Position (ATC becomes 5-position) : $400.00 
  • Ethernet Card for Network Connection : $340.00  
  • ER40 Tool Holder Set: Four ISO-30 Tool Holders w/ ER40 Collet (1 inch capacity), Cover-Nut, Spanner Wrench & Tightening Fixture : $1,050.00  
Spindle:
  • HSD ES929 – 11HP, ISO-30 Type Push-Button, Quick-Change/ATC Spindle, (QEFC) : $10,170.00 

Total Price $44,610

Additional Information

Machine Number 9367
Inventory Code NROUT
Size 000