The Source for Thermoformers, CNC Routers, Heat Sealers & More

Sencorp model 2500 CIP Manufactured in 1984

Machine Number: 9889

Size: 360

 
OR

Quick Overview

Sencorp model 2500 CIP Manufactured in 1984

Video Feed

9889

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • 9889
  • 9889
  • 9889

Details

Used Sencorp 2500 CIP SPECIFICATIONS: Min. Sheet Width: 16' Max. Sheet Width: 32' Max Index: 33.5' Type Index: Hydraulic Form Press Drive: Hydraulic Cutting Tonnage: 75 Tons Upper Shut Height: 12' Bottom Shut Height: 6' Upper Platen Strokes: 1'- 2' - 3' - 4' - 5' Lower platen Strokes: 1' - 2' - 3' - 4' Max Mold Width (O.D.: 30' Max Mold Length (O.D.): 33' Plug Dwell: Yes Stations oh Heat at Max Index: 5 - 165' Top & Bottom Cycle Speed (Dry Cycle: 20 Stacker: Yes Form Pressure Max: 100 PSI Veeder Root Programmer: Solid State Web Carrier: #50 Pin Chain Vacuum Pump: 3 HP Approximate Weight: 20,000 lbs. Electrical Requirements 480Volts 3-Phase 60 Hz. Sentinel Parts Stacking System: Will automatically upstack, count, and separate formed parts into a magazine. Stacker magazine can be uploaded from either side of machine. (Stacker tooling not included) Vacuum System: Unit supplied with the machine is positioned under the pre-heat oven. System will also have an air eject feature tied into the vacuum system and through the digital programmer. Lubrication System: Machine is fitted with a centralized lubrication system and automatic chain lubrication system. Control Panel: Panel contains all temperature controllers, manual, and automatic control switches. Sequence Cycle Controls: Machine, forming and trimming functions is controlled by a Veeter root Programmer. Safety timer to automatically shut down machine and retractable heaters if normal cycle time is exceeded by one or two seconds. Pre- Heat Oven: Top & bottom retractable pre-heaters retract automatically when the machine stops. The length to be 165' with special designed S-shaped calrods (specially designed for Polypropylene). Zones broken down lengthwise and will have shut-off switches for equal indexes of heat. Special Index Mechanism: Sheet advance will be affected by a hydraulic cylinder, operating rack and gear drive with pneumatic clutch. Form & Cut-In-Place Station: Four-post, four-point toggle operated upper & lower moving platens. Top and bottom strokes are controlled by adjustable stops and include decelerating valves. Trim pressure and toggles are activated by hydraulic system.

Mfg: PI/Sencorp                          Edge zone: 2 top/2 bott

Model: 2500                                Trim: Cut in place

Year: 1984                                  Controls: Multi-Control Veeder Root

Forming Area: 30”x30”                 Scrap Rewinder: Air

Platen: Hydraulic                         Condition: GOOD

Index Drive: Air                           Voltage: 230V/240Amp

Heat Source: Calrod                    Materials run: HIPS

Top Zone: 3                               



Additional Information

Machine Number 9889
Inventory Code VAC5
Size 360