Refurbished SIBE AUTOMATION VACUUM FORMER 48" X 60"

Type:
Single Station Thermoformers
Manufacturer:
SIBE AUTOMATION
Model:
48" X 60"
Condition:
Used - Rebuilt
Stock #:
202613
Status:
For Sale
Description:
SIBE AUTOMATION VACUUM FORMER 48" X 60" DUAL HEATER DUAL PLATEN REFURBISHED
MAXIMUM FORMING AREA IS 46" X 58 "
MAXIMUM SHEET SIZE IS 48" X 60"
BOTTOM PLATEN HAS A STROKE OF 24", TOP PLATEN 30" STROKE WITH FULLY ADJUSTABLE SPEED CONTROLS AND LENGTH OF TRAVEL
PLATENS ARE STABILIZED BY A RACK AND PINION ASSEMBLY
PNEUMATIC CLAMPING FRAME, FULLY ADJUSTABLE, CLAMPING BARS WITH SPRING LOADED PINS, QUICK DISCONNECTS ON LINES TO CLAMPING CYLINDERS
INFRARED ENERGY EFFICIENT CERAN GLASS HEATERS PANELS, TOP AND BOTTOM, WITH A HEAT DENSITY OF 15 WATTS PER SQUARE INCH, PLC PROVIDES SOFT START
24 INDEPENDENTLY CONTROLLED HEATING ZONES , ZONES DRIVEN BY SOLID STATE RELAYS
Upon start up the heaters go through a soft start sequence, reducing the electric power peak demand.
To prevent energy waste, if the start push button has not been activated for an hour the heaters are shut off automatically, if the start button is activated after the period of time, heaters will come back on.
EACH FUNCTION OF THE MACHINE IS PLC CONTROLLED WITH A FRIENDLY 6" TOUCH SCREEN OPERATOR INTERFACE
PLC WILL STORE 30 DIFFERENT RECIPES
MANUAL, SET UP AND AUTOMATIC OPERATION
PLATEN AS WELL AS CLAMPING FRAMES ARE MOUNTED ON LINEAR BEARINGS THAT RIDE ON HARDENED SHAFTS
COOLING OF MATERIAL PROVIDED BY 2 3250 CFM FAN
The vacuum system consists of a 5 HP. Becker vacuum pump with a 120 gallon accumulating tank. We provide all of our machines with high flow pilot operated vacuum valves with a diameter of 1.5” supplying vacuum and air eject
We also supply a photoelectric sensor to control vacuum pull if you using a pre draw box. Our vacuum valves are controlled in such a way that they can provide pulsating vacuum to reduce material webbing when running tall male molds. You can
control duration of each pulse, interval between pulses and number of pulses.
WE INCLUDE 2 FLEXIBLE VACUUM HOSE TO ATTACH TO MOLDS
INCLUDES OPERATING MANUAL, ELECTRICAL SCHEMATICS
MACHINE REQUIRES 180 AMPS, 240 VOLTS 3 PHASE POWER SUPPLY, OTHER VOLTAGES AVAILABLE
FOOTPRINT IS 100" X 138"
Specifications from OEM brochure and equipped with are described to the best of our knowledge. ALL items should be confirmed by buyer.

General Specifications:

LENGTH
60"
WIDTH
48 in