Used 2011 THERMWOOD CS43 CNC Router

Type:
Used 3 Axis CNC Routers
Manufacturer:
THERMWOOD CNC Routers
Model:
CS43
Condition:
Not Specified
Year:
2011
Stock #:
202733
Status:
For Sale
Description:
MACHINE:
•Fixed table, moving gantry, three-axis configuration
•Ultra-rigid, tab welded structural steel base and bridge, fully stress relieved
•Highly efficient 61 inch wide by 121 inch deep steel high flow vacuum table
•Siemens high performance AC Brushless Servo Drives
•Helical rack drives on the major axes and high-efficiency ball screw drive on the vertical axis
•Cutting speeds to 2,800 inches per minute
•Three-dimensional volumetric laser compensation including axis interaction compensation through the entire working envelope
•380 – 440 Volt 50 Hz / 440-480V 60Hz 3 Phase power input (other voltages optional)

PART HOLD-DOWN:
•Includes a single zone, single high-flow plumbing port and pneumatic open/close switch
•3/4" MDF high flow vacuum table board
•1/4" MDF high flow vacuum waste board
15 HP BUSCH R5 COMBINATION VACUUM PUMP:
•The pump is an oil sealed rotary vane direct drive style pump and is air cooled. This pump utilizes an automotive type spin-on oil filter, and offers a built-in inlet anti-suck back valve that prevents the pump from rotating backwards. The pump is coupled to a 15hp, 230/460 Volt, 60 Hz, 3 phase, TEFC motor that generates 330 CFM and 29 IN Hg (at sea level. Includes, inlet filtering, electric starter, and approximately 15 feet of vacuum hose channeled from the pump to the machine base.
g/retracting air operated cylinders. Configured as a set of (3) three.

TOOLING:
•One (1) 12 HP, 3,000 to 24,000 RPM programmable variable speed HSD brand router mounted to a servo controlled Z-axis
•11-position Bar Style Automatic Tool Changer with eleven (11) ISO-30 tool holders with collets.
•Also included is a pre-set tool holder fixture and dust hood.
•Maximum tool size is 2” diameter and 3" length

TOTAL AUTOMATIC LUBRICATION SYSTEM:
•Automatic oil lubrication automatically provides continuous oil lubrication to the rail bearings.
•Automatic grease lubrication for a helical rack system.
A pressurized greasing system which continuously applies lubricant with a polyurethane foam pinion using a special grease based on lithium/calcium complex with extreme pressure additives

PORTABLE HAND HELD PROGRAMMING UNIT:
•Equipped with durable 24-key steel-dome membrane keypad and LCD sunlight readable display. The unit is housed in a rugged ABS case with rubberized sure grip sides and comes with a custom holding saddle mounted to the machine control cabinet.
Programming features include:
•Direct creation of machine motions including linear, arc/circular, helical, and elliptical, and other programming functions.
•Direct feed rate override % control.
•Zero feed rate % button.
•Power feed positioning at current feed rate until button is released
•Pulse/move an axis at a set increment for fine positioning.
•Power pulse an axis for fine positioning until button is released
•Part program lines/blocks displayed.
•Scroll through part program lines/blocks to view any line.
•Current feed rate is always displayed on teach screens.
•Current pulse increment is always displayed during line/motion teach.
•Feed hold capability for controlled halting of runtime execute.

AIR ASSISTS PARTS REMOVAL..BLAST OF AIR THROUGH THE VACUUM PORT
208V / 240V TRANSFORMER: (Customer to specify)
Voltage input at 208 V / 240V 3 Phase, 60 HZ is converted to operate at standard 480V.
• 208 V / 240V CONSTANT VOLTAGE LINE TO THE 3 PHASE TRANSFORMER PLEASE SEE FINAL VOLTAGE SHEET FOR AMPERAGE RATINGS.


Equipped With
QCore CNC Thermwood Controls, WINDOWS 7, THM 8.1 SOFTWARE
Specifications from OEM brochure and equipped with are described to the best of our knowledge. ALL items should be confirmed by buyer.

General Specifications:

LENGTH
120 in
WIDTH
60 in