Used 2003 Thermwood C67 5 Axis CNC Router Dual 5' x 5' Tables Upgraded to Qcore Controller in 2020

Used 5 Axis CNC Routers
Used - Good
Stock #:
For Sale
- Programmable and controlled 5 axis motion
- High Performance high reliability brushless AC Servo Drive System with high acceleration and deceleration rates and feed speeds to 1500 inches/ minute
- Ground and hardened steel ways on all linear axes
- 36'' vertical stroke (Z axis)
- 362 degrees horizontal rotation motion
- 270 degrees vertical rotation
- Upgraded to Qcore Controller in 2020
- Air conditioned control cabinet
- Solid-state memory and control system, fully diagnostic
20.4 Gigabyte hard disk for part and system storage
- 3-1/2'', 1.4 megabyte floppy disk drive
- 14'' color monitor with keyboard
- 85 key, 101 key emulation keyboard
- EIA 274D programming
- Network card
- CD Rom
- Control Touch Pad
- Feedrate over ride
- Feed hold
- Menu driven programming
- Laser calibration and certification
- Lead screw compensation system
- 480 Volt, 60 Hz, 3 Phase power input and requires 30 amps
Work Table:
- Dual 60'' x 60'' aluminum multi function tables. The tables travel front to back and are equipped with integral plenums and T-slots for fixture mounting
Machine enclosure:
- Unit surrounds the machine on all 4 sides and consists of an aluminum framework with a combination of lexan and plastic panels. The unit has 4 doors, which allows loading/ unloading as well as access for tooling changes and maintenance.
Part hold-down:
- Table equipped for vacuum hold-down. includes dual 2'' diameter high-flow plumbing ports with single on/ off control along with 3'' diameter vacuum hose channel from table to machine base.
- 7.5 HP dual end, high fgrequency router spindle, variable programmable speed 3000 to 18000 RPM. Maximum collet size is 5/8''. Includes (2) covernuts and (2) 1/4'', (2) 3/8'', and (2) 1/2'' collets. Allows continuous axis 5 rotation. Requires 15 CFM at 90 PSI.
Automatic lubrication system
Automatic tool length measurement
Portable hand held programming unit
Gantry lighting system
7.5 HP Busch Vacuum pump
Specifications from OEM brochure and equipped with are described to the best of our knowledge. ALL items should be confirmed by buyer.

General Specifications:

120 in
60 in