Used Welex 41" sheet extrusion line

Used Extrusion Equipment

Welex

41''

Used - Good

1988

202803

For Sale

Used Welex 41" sheet extrusion line:
- 3.5" 30/1/ L/D Welex extruder.
Model 3.5-30:1LHSV,
Has vented and plugged barrel, but includes 2 stage screw and spare screw. Has electrically heated water cooled system with water pump.

Extruder is driven by a 150 HP DC motor with SCR control, has Lufkin change gear gearbox.
Extruder is equipped with a static mixer and co extrusion block.
Has 55" centerline height.
- Beringer screen changer with hydraulic pump.
- Welex 56/56 melt pump with 20 HP motor
- 34" flex lip die with choker bar and replaceable lower lip.
- 18" X 41" Welex sheet extrusion stack. model 18X41RHSL
Rolls are silent chain driven, and air actuated nipping pressure with 8.5" OD cylinders. Has 42" wide rubber to metal 6" diameter pull roll package driven by 1 HP motor and includes dual razor blade slitting station. Includes temperature control pumping package, operator control panel.
Previous use high impact polystyrene in a laboratory setting.
- Beringer screen changer with hydraulic pump.
- Welex 56/56 melt pump with 20 HP motor
- 34" flex lip die with choker bar and replaceable lower lip.
- 18" X 41" Welex sheet extrusion stack. model 18X41RHSL
Rolls are silent chain driven, and air actuated nipping pressure with 8.5" OD cylinders. Has 42" wide rubber to metal 6" diameter pull roll package driven by 1 HP motor and includes dual razor blade slitting station. Includes temperature control pumping package, operator control panel.
Previous use high impact polystyrene in a laboratory setting.