2019 FMT Patriot 5 x 10 with automatic toolchanger and Becker pump, under power excellent

Used 3 Axis CNC Routers

FREEDOM MACHINE TOOL

Patriot 5 x 10

Used - Excellent

2019

203049

Pending Sale

5' X 10' TABLE
8 P0SITION TOOL CHANGER
7 INCH Z
NEW 2019
Becker vaccI’m pump
Under power,
Model Description
2.1 MODEL
The Freedom 10 machine is an industrial-quality 3-axis 5' x 10' moving gantry CNC router and is capable of maximum rapid feed rates of 1,200 inches per minute. The X-axis is the bridge axis and travels left to right over the 60-inch dimension of the table. Actual Stroke is 69 inches. The X-axis carriage plate moves on 25 mm profiled ways. It is driven by a 25 mm recirculating ball screw assembly. The ball screw spins and is supported on each end by angular contact bearings. The maximum feed rate is 800 inches per minute. The Y-axis is the Gantry axis and travels front to back over the 120-inch dimension of the table. Actual stroke is 121 inches. The
Gantry moves 30 mm profiled ways. It is driven by a 40 mm spinning ball nut and recirculating ball screw assembly. The maximum feed rate is 1200 inches per minute. The Z-axis is ball screw driven and supported by air cylinder counter balances.
Machine Construction
Freedom machines are constructed of a rigid, fabricated steel base, utilizing heavy gauge steel tube and plate weldment construction throughout. All structural members are stress relieved for maximum stability, and all surfaces that mount precision components are precision ground and/or machine