Used 2016 Starview BSC16-1418 Carousel Style Clamshell - Blister Sealing Line

Manufactured by Starview Model: BSC16-1418 Year of manufacture: 2016 Carousel style Electrics: 480 volt, 60hz, 3ph, 25 amp Was running an OTC pharmaceutical product Was placing either one, two or three blisters of tablets per product Four product stations across / per index Station 1: placement of the paperboard face Station 2: placement of the clear blister in face cutout Station 3: blister card placement in to clear clam-shell face Station 4: rear card placement Station 5: heat sealing of package Station 6: cooling station Station 7: product discharge by vacuum pick and place Printer for lot and expiry Cognex vision system Automatic reject on product discharge (one entire row of 4 not for an individual piece) Check Weigher Manufacturer: Mettler Toledo Model: S2 Serial #: 32003803 Year of manufacture: 2007 CE marked Maximum capacity: 500 grams Electrics: 230volt, 50/60hz, 1ph Was used to check finished product for correct weight / missing any blister cards Automatic reject Stainless steel construction Belt style product transfer Touchscreen operator interface Finished Product Bander Manufactured by Controls Engineering Model: AP-RC Serial #: 0752 Electrics: 480volt, 3ph, 60hz, 12 amp Air requirement: 80 psi @ 1cfm Painted steel construction Used to collate three packages and band groups together Banded groups were then hand packaged in to cases Case Taper Manufactured by Little David / Loveshaw Model: LD53B / SP304 Adjustable height top tape head Adjustable width side gripper belts Top and bottom tape heads Painted steel construction Print and Apply Case Labeler Manufactured by Domino Model: M230i-T6-400-LEFT Serial #: 2243082 Part number: MST-692461 Year of manufacture: 2015 Tamp on style label placement Used for labeling one side of finished cases of product (no corner wrap) Robotic Blister Stacker / Orienter Manufactured by The House of Design Project - Serial #: 70482-01 Year of manufacture: 2016 Robot manufactured by ABB Robot model: IRC5/IRB1200-5/0.9 Finished blisters are transported to the robot by conveyor from the blister packaging area. Unit was used to fill cardboard trays with finished blisters of product The robot takes an empty tray from a magazine - fills it with blister cards standing on edge - fills the tray and moves it to a finished tray magazine An operator then takes the filled trays to the clamshell machine to stack the blisters in the supply magazines for secondary packing in the clamshell packages.