Used 2007 Starview IF-2540 Inline Thermoformer

Standard Features provided by Starview • Programmable logic control (Omron) ◦ Intelligent system that allows changes or upgrades from a Starview provided flash memory ◦ Ethernet connection to PLC and HMI allows remote access by customer from PC, Laptop, smartphones and tablet devices to HMI screens and PLC functions, and by Starview for program changes, diagnosis or updates when internet connected. Optional Wi-Fi connection available. • Color HMI includes: ◦ Time and date displayed on all screen pages ◦ System monitoring page. Heating, batch counter and job recipe displayed at a glance ◦ Full Job Recipe storage with memory for up to 100 different recipes ◦ History page with last 200 cycles stored and displayed with time and date stamp ◦ Form Cycle Timer ◦ Vacuum delay timer ◦ Vacuum timer ◦ Cooling delay timer ◦ Mold cooling timer ◦ Manual film jog for film loading (forward and reverse) ◦ Film Index length ◦ Step-up counter ◦ Production speed (cycles per minute) ◦ Automatic cycle mode ◦ Complete manual control of all individual functions for set up ◦ Machine diagnostics with difficulty location ◦ On-screen system errors for troubleshooting ◦ Last 7-days alarms stored and displayed with time and date stamp ◦ Electrical parts page(s) ◦ Pneumatic parts page(s) ◦ Mechanical parts page(s) • Off/On main disconnect • Cycle start button • Emergency STOP push button • Film roll holder • Automatic film unwind, dancer type • Zoned upper heater oven are about 10” long ceramic heaters. • heater panel system with percentage heater zone control accessed directly from the Touch Screen. Each heater zone is individually controlled by thermocouples with electronic power checks to maintain maximum heating stability and precise material heating. Warning messages appear on the HMI if one or more heating elements are not functioning. • Retractable heater oven • Water cooled, electric motor driven double row pierce chain film index • Automatic pneumatic chain tensioner • Automatic film clamping • Automatic plug / grid assist • Machine accepts male or female molds • Automatic dual stage vacuum system • Automatic mold blow-off for finished part release • Automatic cooling blowers, high power type • Water cooled mold platen with 2 inlets and 2 outlets • Automatic sheet cutoff-top/bottom knife to accommodate male or female formed parts • Safety guards • Filter, Regulator & Pressure gauge & lubricator installed on airline • Easy access to machine for maintenance ◦ Welded heavy-wall steel tube construction ◦ Steel components painted blue color Specifications Electrical: 208-230 Volts / 3 PH / 80 Amps Control: 24 Volts DC Air inlet size: 3/4” NPT female Maximum air consumption per cycle: 9.0 scf @ 100 psi Upper heating oven: Radiant heater panel 23.7KW Number of heating zones: 15 Form platen actuation: Pneumatic Plug / grid platen actuation: Pneumatic Vacuum system: 3 HP, Electric, positive displacement, 70 M³/h Vacuum tank: 25 gallons Number of cooling blowers: 4 Maximum forming area: 25” x 40” Minimum forming area (standard): 25” x 20” Minimum forming area with smaller water cooled base and clamping bar set: 20” x 15” Maximum film clamp frame opening: 5” Maximum forming height/depth: 4” Maximum form platen stroke: 8” Typical maximum film thickness: 0.060” Maximum film width: 27.5” Film roll holder maximum capacity: 600 LB. Cycle speed: Top heater oven only, Variable 1-8 cpm average Top and bottom oven, Variable 1-12 cpm average Approximate dimensions: 226”W x 85”D x 85”H Working Height: 41.0” Approximate weight: 4,500 LB. Replacement cost $150,000.00