Sold

Used 2003 Thermwood C67 5 Axis CNC Router Dual 5' x 5' Tables Upgraded to Qcore Controller in 2020

Used 5 Axis CNC Routers

Overview
Description
Specifications

Manufacturer:

THERMWOOD

Model:

C67

Condition:

Good

Year:

2003

Stock #:

202689

- Programmable and controlled 5 axis motion - High Performance high reliability brushless AC Servo Drive System with high acceleration and deceleration rates and feed speeds to 1500 inches/ minute - Ground and hardened steel ways on all linear axes - 36'' vertical stroke (Z axis) - 362 degrees horizontal rotation motion - 270 degrees vertical rotation - Upgraded to Qcore Controller in 2020 - Air conditioned control cabinet - Solid-state memory and control system, fully diagnostic 20.4 Gigabyte hard disk for part and system storage - 3-1/2'', 1.4 megabyte floppy disk drive - 14'' color monitor with keyboard - 85 key, 101 key emulation keyboard - EIA 274D programming - Network card - CD Rom - Control Touch Pad - Feedrate over ride - Feed hold - Menu driven programming - Laser calibration and certification - Lead screw compensation system - 480 Volt, 60 Hz, 3 Phase power input and requires 30 amps Work Table: - Dual 60'' x 60'' aluminum multi function tables. The tables travel front to back and are equipped with integral plenums and T-slots for fixture mounting Machine enclosure: - Unit surrounds the machine on all 4 sides and consists of an aluminum framework with a combination of lexan and plastic panels. The unit has 4 doors, which allows loading/ unloading as well as access for tooling changes and maintenance. Part hold-down: - Table equipped for vacuum hold-down. includes dual 2'' diameter high-flow plumbing ports with single on/ off control along with 3'' diameter vacuum hose channel from table to machine base. Tooling: - 7.5 HP dual end, high fgrequency router spindle, variable programmable speed 3000 to 18000 RPM. Maximum collet size is 5/8''. Includes (2) covernuts and (2) 1/4'', (2) 3/8'', and (2) 1/2'' collets. Allows continuous axis 5 rotation. Requires 15 CFM at 90 PSI. Automatic lubrication system Automatic tool length measurement Portable hand held programming unit Gantry lighting system 7.5 HP Busch Vacuum pump

ImperialMetric

LENGTH	120 in
WIDTH	60 in

-QCORE CONTROLLER new in 2020
DUAL 5x5 Tables

Specs below provided by Thermwood

Programmable and controlled 5 axis motion
- High Performance high reliability brushless AC Servo Drive System with high acceleration and deceleration rates and feed speeds to 1500 inches/ minute
- Ground and hardened steel ways on all linear axes
- 36'' vertical stroke (Z axis)
- 362 degrees horizontal rotation motion
- 270 degrees vertical rotation
- Upgraded to Qcore Controller in 2020
- Air conditioned control cabinet
- Solid-state memory and control system, fully diagnostic
20.4 Gigabyte hard disk for part and system storage
- 3-1/2'', 1.4 megabyte floppy disk drive
- 14'' color monitor with keyboard
- 85 key, 101 key emulation keyboard
- EIA 274D programming
- Network card
- CD Rom
- Control Touch Pad
- Feedrate over ride
- Feed hold
- Menu driven programming
- Laser calibration and certification
- Lead screw compensation system
- 480 Volt, 60 Hz, 3 Phase power input and requires 30 amps
Work Table:
- Dual 60'' x 60'' aluminum multi function tables. The tables travel front to back and are equipped with integral plenums and T-slots for fixture mounting
Machine enclosure:
- Unit surrounds the machine on all 4 sides and consists of an aluminum framework with a combination of lexan and plastic panels. The unit has 4 doors, which allows loading/ unloading as well as access for tooling changes and maintenance.
Part hold-down:
- Table equipped for vacuum hold-down. includes dual 2'' diameter high-flow plumbing ports with single on/ off control along with 3'' diameter vacuum hose channel from table to machine base.
Tooling:
- 7.5 HP dual end, high fgrequency router spindle, variable programmable speed 3000 to 18000 RPM. Maximum collet size is 5/8''. Includes (2) covernuts and (2) 1/4'', (2) 3/8'', and (2) 1/2'' collets. Allows continuous axis 5 rotation. Requires 15 CFM at 90 PSI.