Sold

Used 2007 Techno-Isel LC-Series 4896 CNC Router

Used 3 Axis CNC Routers

Overview
Description
Specifications

Manufacturer:

TECHNO

Model:

LC-Series 4896

Condition:

Good

Stock #:

202786

- BARELY used CNC router including control software, quick-start guide file and manuals - Purchased new a few years back by a high school industrial arts program - Low hours of run time show in condition - Sale is as-is without any manufacturer or seller warranties - Buyer is responsible for pick-up and transport - Machine is in excellent physical condition and working order – an awesome addition to your shop! GENERAL DESCRIPTION: The LC Series of machines are light-duty, low-cost machines. They can be bundled with a high-speed set of electronics that can power through heavier cuts. Low-speed electronics provide rapid speeds of around 250 inches per minute. High speed electronics allow rapid travels between 800 and 1200 inches per minute. Ideal for cutting profiles, engraving, drilling or other machining of materials including: Acrylic – Aluminum – Wood – Other Metals MACHINE MODEL: LC Series 4896 POWER REQUIREMENTS: 120v single-phase; 6.30A; 50/60hz MACHINE TRAVEL: X-axis = 48.0” (1,219mm) Y-axis = 96.0” (2,438mm) Z-axis = 8.9” (226mm) CONTROLLER/MOTOR SPECIFICATIONS: Repeatability = 1 mils (25.4 ¬µm) Resolution = 0.2000 mils (5.08 ¬µm) Maximum Speed = 250 to 800 in/min (106 to 339 mm/sec) ROUTER HEAD: Porter-Cable model 7518 120v AC; 15A 10,000 – 21,000 rpm TOOLING/ACCESSORIES INCLUDED: 3) collets Collet wrenches Chip vacuum brushes Desktop PC loaded with software Corded keyboard; corded mouse; 15” flat-screen monitor; power cords OPTIONAL ACCESSORIES AVAILABLE FROM MANUFACTURER: Multiple-spindles (NOT INCLUDED WITH MACHINE) Tool changer (NOT INCLUDED WITH MACHINE) Vacuum table (NOT INCLUDED WITH MACHINE) CONTROL SOFTWARE and DOCUMNETATION: Original factory CD included Servo G-code interface and drivers available via download from manufacturer website

ImperialMetric

LENGTH	96"	2,438.4 mm
WIDTH	48"	1,219.2 mm

MACHINE MODEL:
LC Series 4896

POWER REQUIREMENTS:
120v single-phase; 6.30A; 50/60hz

MACHINE TRAVEL:
X-axis = 48.0” (1,219mm)
Y-axis = 96.0” (2,438mm)
Z-axis = 8.9” (226mm)

CONTROLLER/MOTOR SPECIFICATIONS:
Repeatability = 1 mils (25.4 ¬µm)
Resolution = 0.2000 mils (5.08 ¬µm)
Maximum Speed = 250 to 800 in/min (106 to 339 mm/sec)

ROUTER HEAD:
Porter-Cable model 7518
120v AC; 15A
10,000 – 21,000 rpm

TOOLING/ACCESSORIES INCLUDED:
3) collets
Collet wrenches
Chip vacuum brushes
Desktop PC loaded with software
Corded keyboard; corded mouse; 15” flat-screen monitor; power cords

OPTIONAL ACCESSORIES AVAILABLE FROM MANUFACTURER:
Multiple-spindles (NOT INCLUDED WITH MACHINE)
Tool changer (NOT INCLUDED WITH MACHINE)
Vacuum table (NOT INCLUDED WITH MACHINE)

CONTROL SOFTWARE and DOCUMNETATION:
Original factory CD included

This equipment has been sold. Similar equipment available now is shown below.